Descrizione

In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: Reject capture buffers smaller than two packets line6_capture_copy() splits the copy into the ALSA ring buffer once at the buffer end and wraps pos_done once, which is only correct when one packet holds at most buffer_size frames. The packet size comes from the device's endpoint, and the per-device hw structs allow 64-byte periods with periods_min 1, so a packet can be larger than the whole buffer. audio_in_callback() logs an oversized packet and then copies it anyway. The packet size is known at probe time, so constrain SNDRV_PCM_HW_PARAM_BUFFER_BYTES in snd_line6_capture_open() to at least twice the larger of the two endpoints' packet sizes. Two rather than one, because pos_done advances by the packet and wraps once, so a buffer of exactly one packet leaves the position unchanged after every packet. hw_params then rejects a buffer that cannot hold two packets, and the single wrap is valid for every configuration that gets through. Keep a guard in line6_capture_copy() that drops an oversized packet with a ratelimited error, for the case that should no longer be reachable. Reproduced on 7.3-rc7 with a USB/IP device presenting the GuitarPort interface layout and 1024-byte packets into a 128-byte buffer: ALSA logged "invalid position: pos = 224, buffer size = 32" and the driver logged "driver bug: len" on every following packet. With this patch a 1024-byte buffer is refused at hw_params, and a 2048-byte buffer streams for 30 s with no report and with the position moving inside the buffer.

Testo originale del record CVE (in inglese).

Come correggere

Priorità: Bassa — correggere con la manutenzione ordinaria. Motivazione: EPSS 0.2% (percentile 10).

Versioni da aggiornare

  • Linux Linux: versione corretta 6.12.118 (o successiva).
  • Linux Linux: versione corretta 6.18.64 (o successiva).
  • Linux Linux: versione corretta 7.3.5 (o successiva).
  • Linux Linux: versione corretta 7.4-rc2 (o successiva).
  • Linux Linux: vulnerabile la versione 2.6.30 → installare l'ultima release supportata dal vendor.

Mitigazioni temporanee

Da applicare solo se non è possibile aggiornare subito:

  • Ridurre l'esposizione del componente vulnerabile (segmentazione, accesso solo da reti fidate) finché la patch non è applicata.

Verifica

  1. Individuare tutti gli asset con il prodotto interessato (inventario, scanner di vulnerabilità, CMDB).
  2. Confrontare la versione installata con quelle indicate sopra.
  3. Applicare l'aggiornamento in un ambiente di test, poi in produzione; riavviare i servizi se richiesto.
  4. Ripetere la scansione per confermare la correzione.

Configurazioni interessate

VendorProdottoVersioni vulnerabiliCorretta in
Linux Linux — 6.12.118
Linux Linux — 6.18.64
Linux Linux — 7.3.5
Linux Linux — 7.4-rc2
Linux Linux 2.6.30 —

Riferimenti