Descrizione
In the Linux kernel, the following vulnerability has been resolved: f2fs: zone: fix to avoid bio split on sequential zone In the block layer, bio_split_to_limits() splits a bio if it exceeds any underlying queue limits: 1. queue_max_sectors: Splits bios larger than the transfer limit. This limit is set by the device driver/DMA controller (max_hw_sectors) and device-mapper targets. When flushing dirty pages (governed by VFS writeback_chunk_size() and f2fs nr_pages_to_skip()), f2fs merges contiguous pages into bios up to 512KB (1024 sectors) or more without checking queue_max_sectors, which will be split if the device or DM target enforces a smaller limit. 2. queue_max_segments: Splits bios exceeding scatter-gather segment limits. f2fs allocates bios with up to 256 pages, exceeding the 128-segment limit of DM targets (dm-default-key/dm-crypt) if pages are discontiguous. 3. chunk_sectors: Splits bios crossing chunk/zone boundaries. In f2fs, section_size strictly matches zone_size, and block allocation never spans across section boundaries, so bios never cross chunk_sectors. Crucially, when bio_split_to_limits() splits a bio, bio_submit_split() submits the tail half via submit_bio_noacct() before returning the head half to the caller. On a sequential zoned device, this causes the tail bio to arrive at the zone write plug before the head: dm-3: zone 7: prepare_bio wp mismatch: bio sector 30720 offset 2048 != wp_offset 248, len 248 The write plug rejects the out-of-order tail with BLK_STS_IOERR, causing f2fs_stop_checkpoint() and remounting the filesystem read-only: 2026-09-30T22:09:23.725678+08:00 localhost kernel: CPU: 9 UID: 0 PID: 243 Comm: kworker/9:1H Not tainted 6.12.81-gb3ef518fb26d #5 2026-09-30T22:09:23.725750+08:00 localhost kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 2026-09-30T22:09:23.725753+08:00 localhost kernel: Workqueue: dm-3_zwplugs blk_zone_wplug_bio_work 2026-09-30T22:09:23.725756+08:00 localhost kernel: Call Trace: 2026-09-30T22:09:23.725758+08:00 localhost kernel: <TASK> 2026-09-30T22:09:23.725758+08:00 localhost kernel: dump_stack_lvl+0x4d/0x70 2026-09-30T22:09:23.725759+08:00 localhost kernel: f2fs_stop_checkpoint+0x1df/0x5d0 2026-09-30T22:09:23.725759+08:00 localhost kernel: ? blk_zone_wplug_bio_work+0x4eb/0x740 2026-09-30T22:09:23.725760+08:00 localhost kernel: f2fs_cache_write_end_io+0x545/0x6e0 2026-09-30T22:09:23.725761+08:00 localhost kernel: blk_zone_wplug_bio_work+0x4eb/0x740 2026-09-30T22:09:23.725762+08:00 localhost kernel: process_one_work+0x5c6/0xde0 2026-09-30T22:09:23.725764+08:00 localhost kernel: ? assign_work+0x124/0x4e0 2026-09-30T22:09:23.725765+08:00 localhost kernel: worker_thread+0x403/0xb70 2026-09-30T22:09:23.725765+08:00 localhost kernel: ? __kthread_parkme+0x82/0x140 2026-09-30T22:09:23.725766+08:00 localhost kernel: ? __pfx_worker_thread+0x10/0x10 2026-09-30T22:09:23.725766+08:00 localhost kernel: kthread+0x235/0x2e0 2026-09-30T22:09:23.725767+08:00 localhost kernel: ? recalc_sigpending+0x128/0x1d0 2026-09-30T22:09:23.725767+08:00 localhost kernel: ? __pfx_kthread+0x10/0x10 2026-09-30T22:09:23.725769+08:00 localhost kernel: ret_from_fork+0x2f/0x70 2026-09-30T22:09:23.725769+08:00 localhost kernel: ? __pfx_kthread+0x10/0x10 2026-09-30T22:09:23.725770+08:00 localhost kernel: ret_from_fork_asm+0x1a/0x30 2026-09-30T22:09:23.725771+08:00 localhost kernel: </TASK> 2026-09-30T22:09:23.725771+08:00 localhost kernel: F2FS-fs (dm-0): Stopped filesystem due to reason: 3 To prevent write bios destined for sequential zones from being split: 1. In __bio_alloc(), bound npages to bdev_max_segments(bdev) for writes to sequential zone areas. 2. In page_is_mergeable(), check queue_max_segments() and queue_max_sectors() for sequential zone areas, so f2fs will not merge beyond the queue limits.
Come correggere
Priorità: Bassa — correggere con la manutenzione ordinaria. Motivazione: EPSS 0.2% (percentile 6).
Versioni da aggiornare
- Linux Linux: versione corretta
6.12.118(o successiva). - Linux Linux: versione corretta
6.18.64(o successiva). - Linux Linux: versione corretta
7.3.5(o successiva). - Linux Linux: versione corretta
7.4-rc1(o successiva). - Linux Linux: vulnerabile la versione
4.8→ installare l'ultima release supportata dal vendor.
Mitigazioni temporanee
Da applicare solo se non è possibile aggiornare subito:
- Ridurre l'esposizione del componente vulnerabile (segmentazione, accesso solo da reti fidate) finché la patch non è applicata.
Verifica
- Individuare tutti gli asset con il prodotto interessato (inventario, scanner di vulnerabilità, CMDB).
- Confrontare la versione installata con quelle indicate sopra.
- Applicare l'aggiornamento in un ambiente di test, poi in produzione; riavviare i servizi se richiesto.
- Ripetere la scansione per confermare la correzione.
Configurazioni interessate
| Vendor | Prodotto | Versioni vulnerabili | Corretta in |
|---|---|---|---|
| Linux | Linux | — | 6.12.118 |
| Linux | Linux | — | 6.18.64 |
| Linux | Linux | — | 7.3.5 |
| Linux | Linux | — | 7.4-rc1 |
| Linux | Linux | 4.8 | — |
Riferimenti
- Riferimentohttps://git.kernel.org/stable/c/b9b036bd1e2cfbc189d5811d62d8711e216c40b3
- Riferimentohttps://git.kernel.org/stable/c/c28481c073d4ca30c3c2ab6f1a65051cbe936220
- Riferimentohttps://git.kernel.org/stable/c/e83a3ca9fb7c1f7e439d2c2e547897053342c1c6
- Riferimentohttps://git.kernel.org/stable/c/ec2e624b95cfda1c8b30e3a5b3ca9a55433da6c3