Descrizione

A flaw was found in freeradius. An improper length validation in the EAP-FAST module allows a stack-based buffer overflow during session ticket processing. A remote, unauthenticated attacker can exploit this flaw by sending a specially crafted handshake request, causing the server process to crash and resulting in a Denial of Service (DoS).

Testo originale del record CVE (in inglese).

Come correggere

Priorità: Media — correggere nel prossimo ciclo di patch. Motivazione: CVSS 7.5, EPSS 0.7% (percentile 53).

Versioni da aggiornare

Il record non riporta ancora i prodotti e le versioni corrette (analisi NVD in corso). Consultare l'advisory del vendor nei riferimenti.

Indicazioni del vendor

Workaround (testo originale del vendor):

Disable the EAP-FAST submodule in the FreeRADIUS configuration, or restrict incoming RADIUS traffic to trusted network access points.

  1. Disable EAP-FAST: In `/etc/raddb/mods-available/eap` (or `/etc/raddb/eap.conf`), comment out the `fast` section within the `eap` configuration block and verify that `default_eap_type` is not set to `fast`.
  2. Apply configuration changes: ``` systemctl restart radiusd ```
  3. Limit network exposure: Restrict UDP port 1812 to authorized Network Access Server (NAS) clients using firewalld: ``` firewall-cmd --permanent --zone=internal --add-source=<TRUSTED_IP_OR_SUBNET> firewall-cmd --permanent --zone=internal --add-port=1812/udp firewall-cmd --reload ``` Caveats: Disabling EAP-FAST prevents authentication for any network clients that rely exclusively on EAP-FAST. Restricting firewall rules will block traffic from unlisted authenticator sources. Warning: Restarting or reloading the radiusd service will temporarily disrupt active RADIUS authentication processing.

Mitigazioni temporanee

Da applicare solo se non è possibile aggiornare subito:

  • Ridurre la superficie esposta (disattivare servizi e funzionalità inutilizzati), mantenere attive le protezioni del sistema operativo (ASLR, DEP/NX) e segmentare la rete.

Verifica

  1. Individuare tutti gli asset con il prodotto interessato (inventario, scanner di vulnerabilità, CMDB).
  2. Confrontare la versione installata con quelle indicate sopra.
  3. Applicare l'aggiornamento in un ambiente di test, poi in produzione; riavviare i servizi se richiesto.
  4. Ripetere la scansione per confermare la correzione.

Riferimenti