Descrizione
Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.
Come correggere
Priorità: Alta — pianificare la correzione entro pochi giorni. Motivazione: CVSS 9.1.
Versioni da aggiornare
- Openssl Openssl: vulnerabili le versioni dalla
1.0.2precedenti alla1.0.2zk→ aggiornare alla1.0.2zko successiva. - Openssl Openssl: vulnerabili le versioni dalla
1.1.1precedenti alla1.1.1za→ aggiornare alla1.1.1zao successiva. - Openssl Openssl: vulnerabili le versioni dalla
3.0.0precedenti alla3.0.15→ aggiornare alla3.0.15o successiva. - Openssl Openssl: vulnerabili le versioni dalla
3.1.0precedenti alla3.1.7→ aggiornare alla3.1.7o successiva. - Openssl Openssl: vulnerabili le versioni dalla
3.2.0precedenti alla3.2.3→ aggiornare alla3.2.3o successiva. - Openssl Openssl: vulnerabili le versioni dalla
3.3.0precedenti alla3.3.2→ aggiornare alla3.3.2o successiva. - Netapp Snapcenter: vulnerabili le versioni precedenti alla
6.0.1→ aggiornare alla6.0.1o successiva. - Siemens Simatic S7-1500 Tm Mfp Firmware: vulnerabili le versioni precedenti alla
1.1.1→ aggiornare alla1.1.1o successiva. - Siemens Sidis Prime: vulnerabili le versioni precedenti alla
4.0.700→ aggiornare alla4.0.700o successiva. - Siemens Simatic S7-1500 Cpu 1518-4 Pn/Dp Mfp Firmware: vulnerabili le versioni dalla
3.1.0precedenti alla3.1.5→ aggiornare alla3.1.5o successiva. - Siemens Scalance Wab762-1 Firmware: vulnerabili le versioni precedenti alla
3.0.0→ aggiornare alla3.0.0o successiva. - Siemens Scalance Wam763-1 Firmware: vulnerabili le versioni precedenti alla
3.0.0→ aggiornare alla3.0.0o successiva. - Siemens Scalance Wam766-1 Firmware: vulnerabili le versioni precedenti alla
3.0.0→ aggiornare alla3.0.0o successiva. - Siemens Scalance Wub762-1 Firmware: vulnerabili le versioni precedenti alla
3.0.0→ aggiornare alla3.0.0o successiva. - Siemens Scalance Wub762-1 Ifeatures Firmware: vulnerabili le versioni precedenti alla
3.0.0→ aggiornare alla3.0.0o successiva. - …e altre 31 configurazioni (vedi riferimenti).
Patch e advisory
- Patch: github.com/openssl/openssl/commit/4ada436a1946c…
- Patch: github.com/openssl/openssl/commit/99fb785a5f853…
- Patch: github.com/openssl/openssl/commit/cf6f91f6121f4…
- Patch: github.com/openssl/openssl/commit/e86ac436f0bd5…
- Patch: github.com/openssl/openssl/commit/4ada436a1946c…
- Patch: github.com/openssl/openssl/commit/99fb785a5f853…
- Patch: github.com/openssl/openssl/commit/cf6f91f6121f4…
- Patch: github.com/openssl/openssl/commit/e86ac436f0bd5…
Mitigazioni temporanee
Da applicare solo se non è possibile aggiornare subito:
- Ridurre la superficie esposta (disattivare servizi e funzionalità inutilizzati), mantenere attive le protezioni del sistema operativo (ASLR, DEP/NX) e segmentare la rete.
Verifica
- Individuare tutti gli asset con il prodotto interessato (inventario, scanner di vulnerabilità, CMDB).
- Confrontare la versione installata con quelle indicate sopra.
- Applicare l'aggiornamento in un ambiente di test, poi in produzione; riavviare i servizi se richiesto.
- Ripetere la scansione per confermare la correzione.
Configurazioni interessate
| Vendor | Prodotto | Versioni vulnerabili | Corretta in |
|---|---|---|---|
| Openssl | Openssl | ≥ 1.0.2 < 1.0.2zk | 1.0.2zk |
| Openssl | Openssl | ≥ 1.1.1 < 1.1.1za | 1.1.1za |
| Openssl | Openssl | ≥ 3.0.0 < 3.0.15 | 3.0.15 |
| Openssl | Openssl | ≥ 3.1.0 < 3.1.7 | 3.1.7 |
| Openssl | Openssl | ≥ 3.2.0 < 3.2.3 | 3.2.3 |
| Openssl | Openssl | ≥ 3.3.0 < 3.3.2 | 3.3.2 |
| Netapp | Snapcenter | < 6.0.1 | 6.0.1 |
| Siemens | Simatic S7-1500 Tm Mfp Firmware | < 1.1.1 | 1.1.1 |
| Siemens | Sidis Prime | < 4.0.700 | 4.0.700 |
| Siemens | Simatic S7-1500 Cpu 1518-4 Pn/Dp Mfp Firmware | ≥ 3.1.0 < 3.1.5 | 3.1.5 |
| Siemens | Scalance Wab762-1 Firmware | < 3.0.0 | 3.0.0 |
| Siemens | Scalance Wam763-1 Firmware | < 3.0.0 | 3.0.0 |
| Siemens | Scalance Wam766-1 Firmware | < 3.0.0 | 3.0.0 |
| Siemens | Scalance Wub762-1 Firmware | < 3.0.0 | 3.0.0 |
| Siemens | Scalance Wub762-1 Ifeatures Firmware | < 3.0.0 | 3.0.0 |
| Siemens | Scalance Wum763-1 Firmware | < 3.0.0 | 3.0.0 |
| Siemens | Scalance Wum766-1 Firmware | < 3.0.0 | 3.0.0 |
| Siemens | Sinec Ins | < 1.0 | 1.0 |
| Siemens | Sinec Os | < 3.1 | 3.1 |
| Siemens | Simatic S7-1500 Cpu 1518f-4 Pn/Dp Mfp Firmware | ≥ 3.1.0 < 3.1.5 | 3.1.5 |
| Siemens | Siplus S7-1500 Cpu 1518-4 Pn/Dp Mfp Firmware | ≥ 3.1.0 < 3.1.5 | 3.1.5 |
| Debian | Debian Linux | 11.0 | — |
| Netapp | Active Iq Unified Manager | — | — |
| Netapp | Management Services For Element Software And Netapp Hci | — | — |
| Netapp | Oncommand Insight | — | — |
| Netapp | Oncommand Workflow Automation | — | — |
| Netapp | Ontap Select Deploy Administration Utility | — | — |
| Netapp | Ontap Tools | — | — |
| Netapp | Snapmanager | — | — |
| Netapp | Bootstrap Os | — | — |
| Netapp | A250 Firmware | — | — |
| Netapp | 500f Firmware | — | — |
| Netapp | C250 Firmware | — | — |
| Netapp | H300s Firmware | — | — |
| Netapp | H500s Firmware | — | — |
| Netapp | H700s Firmware | — | — |
| Netapp | H410s Firmware | — | — |
| Netapp | H410c Firmware | — | — |
| Netapp | H610c Firmware | — | — |
| Netapp | H610s Firmware | — | — |
Riferimenti
- Patchhttps://github.com/openssl/openssl/commit/4ada436a1946cbb24db5ab4ca082b69c1bc10f37
- Patchhttps://github.com/openssl/openssl/commit/99fb785a5f85315b95288921a321a935ea29a51e
- Patchhttps://github.com/openssl/openssl/commit/cf6f91f6121f4db167405db2f0de410a456f260c
- Patchhttps://github.com/openssl/openssl/commit/e86ac436f0bd54d4517745483e2315650fae7b2c
- Patchhttps://github.com/openssl/openssl/commit/4ada436a1946cbb24db5ab4ca082b69c1bc10f37
- Patchhttps://github.com/openssl/openssl/commit/99fb785a5f85315b95288921a321a935ea29a51e
- Patchhttps://github.com/openssl/openssl/commit/cf6f91f6121f4db167405db2f0de410a456f260c
- Patchhttps://github.com/openssl/openssl/commit/e86ac436f0bd54d4517745483e2315650fae7b2c
- Advisory del vendorhttps://www.openssl.org/news/secadv/20240627.txt
- Advisory del vendorhttps://www.openssl.org/news/secadv/20240627.txt
- Advisory di terze partihttp://www.openwall.com/lists/oss-security/2024/06/27/1
- Advisory di terze partihttp://www.openwall.com/lists/oss-security/2024/06/28/4
- Advisory di terze partihttp://www.openwall.com/lists/oss-security/2024/08/15/1
- Advisory di terze partihttps://lists.debian.org/debian-lts-announce/2024/10/msg00033.html
- Advisory di terze partihttps://lists.debian.org/debian-lts-announce/2024/11/msg00000.html
- Advisory di terze partihttps://security.netapp.com/advisory/ntap-20240712-0005/
- Advisory di terze partihttps://security.netapp.com/advisory/ntap-20241025-0006/
- Advisory di terze partihttps://security.netapp.com/advisory/ntap-20241025-0010/
- Advisory di terze partihttps://cert-portal.siemens.com/productcert/html/ssa-265688.html
- Advisory di terze partihttps://cert-portal.siemens.com/productcert/html/ssa-277137.html
- Advisory di terze partihttps://cert-portal.siemens.com/productcert/html/ssa-398330.html
- Advisory di terze partihttps://cert-portal.siemens.com/productcert/html/ssa-613116.html
- Advisory di terze partihttps://cert-portal.siemens.com/productcert/html/ssa-769027.html
- Advisory di terze partihttps://cert-portal.siemens.com/productcert/html/ssa-915275.html
- Riferimentohttps://github.openssl.org/openssl/extended-releases/commit/9947251413065a05189a63c9b7a6c1d4e224c21c